The new 17 tonne DX170W-5 Stage IV compliant wheeled excavator from Doosan Construction Equipment will be shown for the first time at the Intermat 2015 Exhibition in Paris, France from 20-25 April 2015. The new DX170W-5 provides significantly higher performance in every area, combining enhanced comfort and controllability together with new features to boost fuel efficiency, uptime and return on investment, with a focus on increased power, robustness and agility. Like all Doosan Stage IV machines, a distinctive new machine styling scheme heralds the many design advances, which go well beyond simply meeting Stage IV emission regulations, setting a new benchmark for wheeled excavators worldwide.
From the standpoint of performance, the DX170W-5 has 10% more engine power, 5% more engine torque and 5% more traction force compared to the previous generation model. The swing speed can now reach 10.8 rpm/minute and swing torque has been increased by 4%. Main pump capacity has increased by 9% and thanks to the increased pressure in the new Negacon hydraulic system, there is a significant increase of 10% in the bucket force and 3% in the arm force.
The extra 220 kg in the weight of the counterweight in the DX170W-5, coupled with increases of 4 and 5 cm in the machine width and wheel base, respectively, have drastically increased lifting capacities while improving stability and comfort when driving. The over the front lifting capacity has increased by 10%, whilst the lifting capacity over the side has gone up by 6%. Other important aspects include the new ‘CabSus’ cab suspension system which reduces vibration by 20% and a massive 4 dBA reduction in cab noise, further increasing safety and comfort for the operator.
Outstanding Comfort and Controllability
The ergonomic and comfort features offered as standard in the new cab are among the best on the market and include the world exclusive Doosan jog shuttle switch; four work and four power modes; control of pressure and flow of the auxiliary lines directly from the operator’s seat; and joystick and pedal proportional control with super controllability via short and low stroke joysticks and a new system allowing usage of the two-way lines either from joystick or pedal.
The operator also has the benefit of improved side visibility, a new user-friendly 7 inch FT LCD colour monitor control panel, fully automatic climate control system, more storage compartments for paperwork and other items, as well as an improved layout with the most important switches grouped together within easy reach on the right console. The new pressurised cab incorporates sealing, air filters and increased air pressure inside to prevent dust from getting into the cab (ISO 10263-3).
CoreTMS Fleet Management System as Standard
In common with all Doosan Stage IV excavators above 14 tonne, the DX170W-5 is factory-installed with the new CoreTMS state-of-the-art wireless fleet monitoring system. Designed specifically for the Doosan range, the CoreTMS system is a new tool providing comprehensive information about machine performance in a dual mode (satellite, GSM). Because the software in the CoreTMS system has been upgraded to communicate directly with the EPOS system on a Doosan excavator, it is the only tool of its type capable of providing this level of information, delivering insightful and cost-saving data about equipment to help customers work more effectively.
Also available for retro-fitting in a kit form, the CoreTMS system is supplied with a free 3-year subscription in new ‘W-5’ wheeled excavators and customers are provided with their own account so that they can manage the machines in their fleet using the system.
Increased Power and Fuel Efficiency
At the heart of the new DX170W-5 excavator is the well-proven 6-cylinder, turbocharged Doosan DL06P water-cooled diesel engine which offers convenience and lower costs by meeting Stage IV emission regulations without the need for a diesel particulate filter (DPF), through the use of cooled exhaust gas recirculation (EGR) and selective catalyst reduction (SCR) after-treatment technologies. The DL06P engine provides an output of 113.3 kW (152 HP) at 2000 rpm, an increase of 10% in engine power.
As well as the DL06P engine, which is one of the most reliable and fuel efficient ever produced by Doosan, new innovative and exclusive features have been introduced that reduce fuel consumption by an average of 10% compared to the previous generation model. Among these features is the new ‘Trip Meter Setting’ screen which allows operators to check fuel consumption daily (or over a desired period) directly from the control panel and to save even more fuel, there is a special Doosan-developed system, Smart Power Control (SPC), which monitors both engine and pump power and limits unnecessary outputs depending on whether the work is light or heavy. The SPC can be used with all 4 work modes (E, S, P, P+).
Further fuel efficiency results from the electric fan clutch on the DX170W-5 excavator which drives the cooling fan at optimum speed. Based on coolant, hydraulic oil, cooled charged air temperatures and target engine speeds, the fan speed is controlled electrically – resulting in much lower fan noise and better fuel efficiency.
A side-view camera is available as an option and the control panel allows the views from both the rear and side view cameras to be combined on the same screen, simply by pressing a button on the control panel. For more safety when using the cameras, a menu bar now stays open so that the operator can keep an eye out for warning symbols and the levels of key gauges. New boom lights on the front equipment more than double the lighting available and for better protection, a guard has been added as standard.
The auto-idling rpm on the DX170W-5 automatically increases from 800 rpm to 1100 rpm when the temperature goes below 10 °C. This boosts the efficiency of the heating inside the cab.
Lower Total Cost of Ownership
In the undercarriage, the chassis frame has been reinforced to reduce stress and improve durability. The outrigger frame has also been strengthened by moving to a box type assembly, with an increase in the thickness of most parts for additional strength. The dozer blade and H-Link have been reinforced to increase rigidity and optimise tightening between the two structures. The height of the dozer blade has been increased along with an improved shape to facilitate pulling and mixing of materials. The size of the outrigger covers has been reduced to lessen the possibility of damage.
Made from cast steel, the arm end boss and arm link boss and side plates have been combined to increase durability. Piping layouts have been redesigned to avoid interferences between hoses and pipes, decreasing pressure loss as a result. The twin tyre rubber spacer has a new symmetric design and a new tight rim connection ensures no bending and a good connection to withstand impacts from stones/other materials.
To further maximise durability and reduce noise, the DX170W-3 is equipped with EM (Enhanced Macro-surface) bushings, which are also much more effective than regular bushings when greased.
Air pre-cleaners are fitted as standard on the DX170W-5, to blow much of the dust, dirt, insects, rain and snow out of the air intake, to ensure cleaner air is sent to the engine air filter. This extends air cleaner servicing intervals, enhancing uptime and productivity. Doosan has also added protection to the inner cab air filter and redesigned the cab air-conditioning filters for easier replacement.
To avoid permanent engine damage, an acoustic alarm has been added to call the operator’s attention to ‘water in fuel’. If the operator ignores the signal after several alerts, the engine and pump are automatically derated. In addition, to make it easier for operators to understand the importance of warnings and to communicate the proper warning codes, pop-up menus appear with detailed information with easier to identify warnings.
There is a larger bonnet opening angle and height for better visibility of the components – the bonnet opening angle has been increased to 57.3° and the door opening height is now 1333 mm. The battery capacity has been increased to 2*150 AH (950 cca) which provides strong cranking performance in cold environments. The alternator has a capacity of 80 A as standard. The battery is located inside the storage box, and the fuel pump is still located inside the pump compartment.
The Engine Emergency Stop Switch has been relocated on the side of the seat so that it is directly accessible from ground level, for faster access in case of emergency. Star-shaped anti-slip plates ensure that the steps stay much cleaner and more effective and to meet new EU regulations, safety bars are installed as standard.
All current options including mono bloc and arti boom, short and long arms and hydraulic lines are available for the new DX170W-5.
For more information about Doosan construction equipment visit: www.doosanequipment.eu
Brief specifications for the Doosan DX170W-5 wheeled excavator (Arti with 2.5 m arm)
- Buckets: 0.66 – 0.90 m3
- Operating weight: 16.8 t
- Digging depth (std front): 5745 mm
- Digging reach (std front): 9090 mm
- Digging height (std front): 10045 mm
- Overall width: 2500 mm
- Height (std front): 3136 mm
- Overall length in travel position (std front): 8320 mm
- Tail swing radius: 2795 mm
- Drawbar pull: 10 kN
- Digging force over bucket (ISO): 12.3 t
- Digging force over arm (ISO): 8.6 t
- Lifting capacity at ground level (over front): 5.97 t at 6.0 m
- Travel speed: 37 km/h
- Engine (SAE J1349, net): 6-cylinder Doosan DL06P
Stage IV (EGR/SCR),
113.3 kW (152 HP) at 2000 rpm
61 Oaklands Grove
London W12 0JE
Tel. +44 (0)20 8723 0161
|Doosan Infracore Construction Equipment EMEA PR / media representative:
Nancy De Sy
Corporate and Public Communication Manager
Tel. +32 2 371 68 41