• Four different vacuum conveying systems
• Twelve different pressure conveying systems.
Each system has its own unique set of operating characteristics for pressure, conveying line velocity, efficiency and performance. Because each and every material to be conveyed reacts differently under a given set of operating conditions, it is extremely critical to match the system operating characteristics to the material to be conveyed in order to achieve the most desired conveying performance and to provide the best value to you, the customer.
Dynamic Air’s 16 different pneumatic conveying concepts have the ability to convey at almost any conveying velocity desired to suit a given material to be conveyed. Dynamic Air can convey many materials with conveying velocities as low as 50 feet per minute (0.25 m/sec) using the HDP 6000 dense phase pneumatic conveying system and, using the LDP 2000 dilute phase pneumatic conveying system, Dynamic Air can convey at velocities well over 7000 feet per minute (35 m/sec). Plus Dynamic Air’s conveying capacities range from just a few hundred pounds (100 kg) of material per hour up to 400 tons per hour and conveying distances exceeding 5000 feet (1500 m) in length.
In addition, Dynamic Air’s pneumatic conveying systems become highly efficient when they employ the unique patented DC-5™ Air Saver technology and are unmatched for performance and reliability. These systems can handle even the most difficult of materials, plus they significantly reduce the energy requirements and convey material at much lower conveying line velocity with higher conveying line densities and reduced dynamic loading.
When Dynamic Air’s DC-5 Air Saver technology is employed on lower pressure systems using less than 15 PSIG (1 barg), in many applications the conveying line velocity can be lowered well below the normal saltation velocity. Depending on the material being conveyed, energy requirements can be reduced and system performance and reliability drastically improved.
Gentle handling of heavy abrasive and non-abrasive materials that cannot tolerate degradation. For many fragile crystalline and granular materials there is no finer material handling process. Dynamic Air’s 16 different pneumatic conveying concepts can offer a more gentle treatment of system components as well. Because of lower velocities, system wear and related breakdowns are minimized.
Dynamic Air Pneumatic Conveying Systems Are:
• Energy and labor efficient
• More reliable, because of our DC-5 Air Saver technology
• Flexible to design in tight plant environments
• Easy to install with minimum disruption to existing plant production
• Clean – because the system totally contains the material conveyed
• Friendly to the environment
• Equipped with fewer moving parts
• Lower in initial investment costs
• Lower in maintenance